1. One hundred percent of the oil consumed by excavators doing ineffective manoeuvres is wasted.
Before we work, we need to plan the excavator's work in advance according to the situation of the construction site to avoid unnecessary operation waste while working.
2. When the bucket cylinder and connecting rod, bucket cylinder and bucket rod are all at 90°, this is when each cylinder has the greatest digging force.
Effective use of this angle when digging will optimise work efficiency.
3. When digging on the ground, keep the bucket or looser floor angle at about 30° and close the bucket bar.
When the bucket stick is close to vertical, the bucket stick has the greatest digging force, can carry more load and is more fuel efficient.
4. The smaller the digging depth, the more economical it is when digging, and try to dig in sections.
5. Rotation angle should be 30°~45°.
In the excavator loading operation, the rotary angle of the excavator must not exceed 60 °, the smaller the angle, the faster the rotary, the higher the output, the less fuel consumption naturally.
6. Place the engine throttle in the economic gear position.
Select the auto idle function to let the engine idle when digging stops.
2021-06-27
2021-09-30
2021-01-13
2021-12-31
2021-01-14
2021-08-10
2021-12-14
2021-01-15